|Barrel Diameter:||Ø 132 Mm||Screw Diameter:||Ø 130 Mm|
|Groove Depth:||32.5 Mm||Length Of Screw:||1050 Mm|
|L/D:||8:1||Screw Design:||Double Screw|
|Motor Power:||15 Kw||Reducer Ratio:||9.5:1|
|Screw Speed:||400 Rpm||Center Distance:||100.5 Mm|
Screw Extruder Side Feeder Machine,
Hopper Side Feeder Machine,
Double Screw Extruder Side Feeder 15kw
|Mark||Part Name||Qty (Pcs)||Function|
|1||SEW Motor||1||Driving System|
|2||Gearbox Section||1||Transmission System|
|4||Screw Section||2||Mixing and conveying the filler|
|5||Barrel Section||2||Carry the screw shaft and melt the material|
|6||Bracket||2||Supporting the Side Feeder|
1. Advantages of Joiner Extrusion Side Feeder
1. Independently develop and produce gearboxes.
a. All gearboxes are machined by gear grinding, the accuracy is up to six grades, and carburizing and hardening the tooth surface, thus ensuring that the noise of gearboxes is very low.
b. Gear casting is made of resin sand and machining center to ensure high precision.
c. The gearbox’s bearing is imported from Germany.
d. The gearbox has unique design, long life and low noise.
e. The gearbox and screw element are connected by spline sleeve, which is very convenient to disassemble
2. Barrel is made of wear resistant alloy steel and cooled by water channel.
3. Screw adopts modular screw, and the screw assembly can be adjusted according to different feeding materials to meet different feeding requirements.
2. Side feeders are used for the following reasons:
--reduction of wear costs in the melting section of the main screw and barrels
--More gentle processing of fillers
--Increase in throughput
--Increase in quality through the enough fixing
--Lower the cost
3. Side Feeder for:
- W&P: ZSK-MC - Berstorff: ZE
- Leistritz: ZSE -MICRO - Theysohn: TSK
- Maris: TM-W - APV:MP65
- JSW: TEX - SM:TEK-HS
- Feddem: FED-MTS - Fessia Macross: NRII
- TOSHIBA: TEM - Labtech: LTE
-USEON:TDS - SHIZHOU:MTE
4. All models we produce
5. Our packing: We use custom wooden cases for packing
7. Products photos:
Contact Person: Heidi.Yang